View larger 
DUPLEX AIR PRO
The DUPLEX AIR PRO is our most comprehensive dual-platen model. It includes all the features of the DUPLEX PRO, plus the added option of membrane platens for marking thick garments with raised surfaces such as workwear and winter clothing.
 |  |  |  |  |  |
 |  |  |  |  |  |
| Type | Pneumatic, Membrane |
| Operation | Swing - Rotating Plate |
| Platen size | 40x50 cm / 16x20 " |
| Max thickness | 45 mm |
| Weight | 193 Kg / 425 lbs |
| Pressure | 625 gr/cm² |
| °C / °F Max | 220 °C / 429 °F |
| Power | 3200 W |
| Power supply | 240 V Single-phase + Neutral + Ground |
| Amperage | 14 A |
| Applications | Flex, ChromaLuxe, Direct to Garment, Pretreatment, Sublimation Rigid Substrate, Textile Sublimation, Screen Printing, Laser Transfer |
| Dimension | 713x891x1099 mm / 28x35x43 " |
Hybrid pneumatic press with dual standard platens + membrane platens and auto-shuttle function.
As the membrane inflates, it evens out raised surfaces, allowing transfers to be applied alongside linings, heavy seams, buttons, zippers, topstitched pockets, etc.
Suitable for: high-volume flex and screen transfer application, sublimating on textiles and rigid substrates, DTG, laser printing, textile marking on thick garments with raised surfaces.
Strengths:
- Auto-open, auto-close and auto-shuttle
- High-power heating for DTG pre-treatment drying
- Foot pedal for hands-free hold-down of the garment before and during pressing
- Quick-change platens
- Safety guard protects against trapped hands and fingers
- Transfers can be applied alongside raised clothing surfaces
- Mixed membrane /standard platen capability
- T-shirts threaded from front or rear of platen
- Allows background tasking on the free platen
- Spacious clearance between, beneath and behind platens
- 3 separate press modes
- Multifunction touch-screen control panel
- Independent platen press times
- Pre-heat time
- Designed and manufactured in France
- Two-year machine warranty
- Ten-year warranty on heating elements
Electronics : | |
|
|
NOMEX COVERNOMEX® cover for lower platen. Protects the lower platen and makes T-shirts (...)
- SHOE PLATE
40x50cm / 16x20" shoe platen. Kit QR not included.
- DRYING PLATE
Sponge platen 40x50cm for easy pre-treatment drying during DTG applications. (...)
- MEMBRANE PLATE
Inflated membrane plate for Duplex Air Pro or Air Clam X. Kit QR not included.
- KIT PLATE
Set of 4 Quick Release / standard plates.
- STANDARD PLATE
Lower platen. Kit QR not included.
- SILENT COMPRESSOR 111 L/MIN
Low-noise compressor for the Duplex Pro, Duplex Air Pro, Slide 1285.
- LASER POINTER DUPLEX
Twin laser for easy transfer alignment. Fits to the Duplex Pro Lite, Duplex (...)
- KIT QUICK RELEASE
Locking pin for fitting a platen to a quick-release press.
- ADDITIONAL LASER
Additional laser for the CROI-159 CROI-160 and CROI-161 systems.
- SUPPORT TABLE DUPLEX
Press table for Duplex models
